IBM 2193 User Manual
User guide
Advertising
Table of contents
Document Outline
- Front cover
- Contents
- Notices
- Conventions used in this book
- Safety information
- 1. Turn off the computer and any external devices (such as a monitor or printer) that have their ...
- 2. Attach a signal cable to each external device (such as a monitor or printer), and then connect...
- 3. Attach communication cables (such as modem cables or network cables) to the computer. Then, at...
- 4. Attach the power cords to the computer and any external devices (such as a monitor or printer)...
- 5. Turn on the computer and any attached devices that have their own power switches.
- 1. Turn off the computer and any attached devices that have their own power switches.
- 2. Unplug all power cables from electrical outlets.
- 3. Disconnect all communication cables (such as modem or network cables) from communication outlets.
- 4. Disconnect all cables and cords from the computer; this includes power cords, signal cables fr...
- Modem safety information
- Laser compliance statement
- Consignes de sécurité
- 1. Mettez l'ordinateur hors tension ainsi que tout périphérique (écran ou imprimante) que vous al...
- 2. Connectez tous les câbles (de l'écran, par exemple) à l'ordinateur.
- 3. Branchez tous les câbles d'interface (par exemple, un câble téléphonique) sur des socles de pr...
- 4. Branchez les cordons d'alimentation sur des socles de prise de courant correctement mis à la t...
- 5. Mettez l’ordinateur sous tension ainsi que tout périphérique connecté disposant d’un interrupt...
- 1. Mettez l'ordinateur hors tension ainsi que tout périphérique connecté disposant d'un interrupt...
- 2. Débranchez tous les cordons d'alimentation des prises de courant.
- 3. Débranchez tous les câbles (câble de téléphone, par exemple) de leurs prises.
- 4. Débranchez tous câbles de l’ordinateur (les cordons d’alimentation, les câbles d’entrée-sortie...
- Consignes de sécurité relatives au modem
- Consignes relatives à la pile au lithium
- Consignes de sécurité pour l’unité de CD-ROM et de DVD-ROM
- Regulatory notices
- 1. The modem adapter card is located in the back of the system unit. It complies with Part 68 of ...
- 2. The REN is useful to determine the quantity of devices you may connect to your telephone line ...
- 3. If the built-in modem causes harm to the telephone network, the telephone company may disconti...
- 4. Your telephone company may make changes in its facilities, equipment, operations, or procedure...
- 5. If you experience trouble with this built-in modem, contact your Authorized Seller, or the IBM...
- 6. No customer repairs are possible to the modem.
- 7. The modem may not be used on coin service provided by the telephone company. Connection to par...
- 8. When ordering network interface (NI) service from the Local Exchange Carrier, specify service ...
- North American Federal Communications Commission (FCC) Statement
- Year 2000 Notice Information
- Ergonomics
- Part 1. Learning about this book
- Part 2. Support information
- Part 3. Controlling system settings
- Chapter 4. Getting started
- Chapter 5. Power management features
- Chapter 6. BIOS Setup configuration
- Part 4. Upgrading and replacing hardware
- Chapter 7. Preparing to upgrade
- Chapter 8. Adding and removing adapter cards and drives
- Chapter 9. Adding and replacing system board components
- Identifying system board parts (machine type 2193)
- Locating system board jumpers and connectors (machine type 2193)
- Identifying system board parts (machine type 2194 and 6345)
- Locating system board jumpers and connectors (machine type 2194 or 6345)
- Card connector and jumper information
- Upgrading the system memory
- Replacing the system battery
- Updating the CMOS settings in Setup
- Part 5. Troubleshooting
- Part 6. Technical reference
- Appendix A. Specification tables
- Appendix B. Modem information
- Appendix C. Monitor terminology
- Appendix D. Warranty
- Warranty statements
- IBM Statement of Limited Warranty for United States, Puerto Rico, and Canada (Part 1 - General Te...
- The IBM warranty for Machines
- Extent of warranty
- Items not covered by warranty
- Warranty service
- 1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exch...
- 2. obtain authorization from the owner to have IBM or your reseller service a Machine that you do...
- 3. where applicable, before service is provided
- a. follow the problem determination, problem analysis, and service request procedures that IBM or...
- b. secure all programs, data, and funds contained in a Machine
- c. provide IBM or your reseller with sufficient, free, and safe access to your facilities to perm...
- d. inform IBM or your reseller of changes in a Machine’s location.
- Production status
- Limitation of liability
- IBM Statement of Warranty Worldwide except Canada, Puerto Rico, Turkey, United States (Part 1- Ge...
- The IBM warranty for Machines
- Extent of warranty
- Items not covered by warranty
- Warranty service
- Production status
- Limitation of liability
- Part 2 - Country-Unique Terms
- ASIA PACIFIC
- EUROPE, MIDDLE EAST, AFRICA (EMEA)
- The following terms apply to the country specified:
- EGYPT: Limitation of liability.
- FRANCE: Limitation of liability.
- GERMANY: The IBM warranty for Machines.
- Extent of warranty
- Production status.
- Limitation of liability.
- IRELAND: Extent of warranty.
- Limitation of liability.
- ITALY: Limitation of liability.
- SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND: Limitation of liability.
- TURKIYE: Production status
- UNITED KINGDOM: Limitation of liability.
- 1. death or personal injury or physical damage to your real property solely caused by IBM's negli...
- 2. the amount of any other actual direct damages or loss, up to the greater of Pounds Sterling 15...
- 3. breach of IBM's obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 o...
- NORTH AMERICA
- Index