Integra DTR-7.4 - Manual (Page 21)

21
Connecting to Audio/Video Equipment —Continued
Using an RCA video connection cable, connect the
video output jack (composite) of the DVD or LD player
to the DVD VIDEO IN jack of the DTR-7.4. Or if the
DVD or LD player has an S video output jack, connect it
to the DVD S VIDEO IN jack with an S video
connection cable. Or if the device has component video
outputs, connect them to one of the banks of
COMPONENT VIDEO INPUT jacks on the DTR-7.4.
On the initial settings of the DTR-7.4, the DVD input
source is set for the COMPONENT VIDEO INPUT 1
jacks.
If you connect the DVD or LD player to the
COMPONENT VIDEO INPUT 2 jacks, this must be
changed at Setup Menu
→ Input Setup → Video Setup
→ Component Video (See page 38).
Using an RCA audio connection cable, connect the
audio output jacks of the DVD or LD player to the DVD
AUDIO IN jacks of the DTR-7.4. Make sure that you
properly connect the left channel to the L jack and the
right channel to the R jack.
If the device has a digital output, connect it to either the
DIGITAL IN COAX jack or DIGITAL IN OPT jack of
the DTR-7.4, depending on the type of connector on the
DVD player.
On the initial settings of the DTR-7.4, the DVD input
source is set for digital input at the COAX 1 jack.
If the digital connection is made at a different jack, this
must be changed at Setup Menu
→ Input Setup →
Digital Setup (See page 36).
Make sure of your DVD player’s digital output settings.
You need to access the On Screen Menu of your DVD
player. See the owner’s Manual on your DVD player.
Also, you need to aware of the Table of contents for the
movie, selecting the movie for Dolby Digital or DTS,
depends how the movie is encoded.
Using RCA video connection cables, connect the video
output jack (composite) of the video cassette recorder to the
VIDEO 1 VIDEO IN jack of the DTR-7.4 and connect the
video input jack of the video cassette recorder to the
VIDEO 1 VIDEO OUT jack of the DTR-7.4. Or if the
video cassette recorder has S video input and output jacks,
connect them to the VIDEO 1 S VIDEO IN and OUT jacks
of the DTR-7.4 using S video connection cables. Or if the
video cassette recorder has component video outputs,
connect them to one of the banks of COMPONENT
VIDEO INPUT jacks on the DTR-7.4.
On the initial settings of the DTR-7.4, the VIDEO 1
input source is set for the COMPONENT VIDEO
INPUT 2 jacks.
If you connect the video cassette recorder to the
COMPONENT VIDEO INPUT 1 jacks, this must be
changed at Setup Menu
→ Input Setup → Video Setup
→ Component Video (See page 38).
Using RCA audio connection cables, connect the audio
output jacks of the video cassette recorder to the VIDEO
1 AUDIO IN jacks of the DTR-7.4 and connect the audio
input jacks of the video cassette recorder to the VIDEO
1 AUDIO OUT jacks of the DTR-7.4. Make sure that
you properly connect the left channels to the L jacks and
the right channels to the R jacks.
If you are connecting a digital output device to the
VIDEO 1 jack instead of a VCR, connect it to either the
DIGITAL IN COAX jack or DIGITAL IN OPT jack,
depending on the type of connector on the device.
On the initial settings of the DTR-7.4, the VIDEO 1
input source is set for digital input at the COAX 2 jack.
If the digital connection is made at a different jack, this
must be changed at Setup Menu
→ Input Setup →
Digital Setup (See page 36).
Connecting a DVD Player (DVD)
FM
75
OUT
OUT
OUT
OUT
L
PHONO
PRE OUT
FRONT
SUB
SURR
R L
AUDIO R L
CD
TAPE
R L
AUDIO VIDEO S VIDEO
MONITOR OUT
R L
IN
IN
IN
IN
IN
IN
IN
ZONE 2
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
AUDIO AUDIO VIDEO S VIDEO
GND
SURR BACK/ ZONE 2
R L IN
R
CENTER
R L
MULTI CH
INPUT FRONT
SUB
SURR
SURR
BACK
CENTER
R L
ANTENNA
Y
P B
P R
OUTPUT
INPUT 1
Y
P B
P R
INPUT 2
Y
P B
P R
DIGITAL IN
OPT
2
1
2
3
1
3
COAX
OPT
1
2
DIGITAL OUT
COMPONENT VIDEO
AM
Y
P B
P R
Y P B P R
COMPONENT
VIDEO
INPUT 1
COMPONENT
VIDEO
OUTPUT
R L
IN DVD
DIGITAL
IN
AUDIO VIDEO S VIDEO
COAX
1
R L DIGITAL
OUT AUDIO
OUT
VIDEO
OUT
S VIDEO
OUT COAX
DVD player
Connecting a Video Cassette
Recorder (VIDEO 1)
FM
75
OUT
OUT
OUT
OUT
L
PHONO
PRE OUT
FRONT
SUB
SURR
R L
AUDIO R L
CD
TAPE
R L
AUDIO VIDEO S VIDEO
MONITOR OUT
R L
IN
IN
IN
IN
IN
IN
IN
ZONE 2
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
AUDIO AUDIO VIDEO S VIDEO
GND
SURR BACK/ ZONE 2
R L IN
R
CENTER
R L
MULTI CH
INPUT FRONT
SUB
SURR
SURR
BACK
CENTER
R L
ANTENNA
Y
P B
P R
OUTPUT
INPUT 1
Y
P B
P R
INPUT 2
Y
P B
P R
DIGITAL IN
OPT
2
1
2
3
1
3
COAX
OPT
1
2
DIGITAL OUT
COMPONENT VIDEO
AM
IN
VIDEO 1
AUDIO VIDEO S VIDEO
OUT
R L
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
R L
AUDIO IN
VIDEO
IN
S VIDEO
IN
R L
VCR
F
acilities and Connections