Setting up the ia63 – iHome IA63 User Manual

Page 8

Advertising
background image

Setting Up the iA63

7

Resetting the Alarm to Come on the Next Day

1. When the alarm is sounding, press the Button or the wakeup button to stop the alarm and reset it to come on

the next day.

NOTE: Pressing the button when the alarm is sounding will cancel the alarm.

Snooze Operation

1. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding)

until the snooze minutes display appears. You will hear beep, indicating Snooze settings mode. Press the + or - Button
to set the snooze timer from 1 to 29 minutes. Press the Snooze/Dimmer Button to confirm snooze setting and exit snooze
setting mode. You will hear 2 beeps confirming snooze time setting.

2. Press the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze duration time then

sound again. Snooze can be pressed several times during the 1 hour alarm cycle.

Sure Alarm

The iA63 has a sure alarm feature. If the back-up battery is installed, the buzzer alarm will still sound in the event of a power
failure.

Tip: Download the free iHome+Sleep app for advanced alarm, snooze and sleep functions

Docking and Charging your iPhone/iPod

1. Gently dock your iPhone or iPod. For added stability in landscape mode, slide the stabilizer lever (located at the top of the

center rest above the dock) to the right to release the stabilizer, then press the stabilizer until it is snug against the side of
the iPhone or iPod. While an iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until
fully charged).

Listening to iPhone/iPod

1. Dock the already playing iPhone/iPod in Dock. The iA63 will automatically turn on and you will hear the music playing from

your iPhone/iPod.

Note: If the playing song volume is too low on the iPhone/iPod, the iA63 may not detect iPod is in play mode. Press the

Button to play it.

2. When an iPhone/iPod is docked and in standby mode, press the Button to play it. “iPod” will appear on the

display to indicate iPod playing mode.

3. Press the Button again to pause play; press again to resume it.
4. Press the + or - Button to skip to the next or previous track on your iPhone/iPod. Press and hold the + or - Button to

search within a track.

5. Press the or to adjust the system volume.
6. To turn off the unit, press the Button. An iPhone/iPod will continue charging while docked.

Mar 9, 2011

Advertising
This manual is related to the following products: