Iluv IMM190 - Manual (Page 3)

iLuv | 4 iMM190 | V10M10_IM_EN_01212010
· This system is designed to operate on AC100V~240V 60/50Hz house current or 6 X AA batteries
(not included) only.
· Connecting this system to any other power source may cause damage to the system and such
damage is not covered by your warranty.
· Main plug is used as the disconnect device, the disconnect device shall remain readily operable.
Power Source
GETTING STARTED
This model is equipped with a non-skid rubber base to prevent the product from moving when you
operate the controls. This base is made from non-migrating rubber material specially formulated
to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber base to soften, and leave
marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware stores and home
improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’ before
you place the product on fine wooden furniture.
Protect your Furniture
Note:
The system has an AC plug and will only fit into matching AC outlets. This is a safety
feature to reduce the possibility of electric shock. If the plug will not fit in your AC
outlets, you should have the outlet changed by a qualified, licensed electrician. Do not
use an adapter to make the plug fit into your outlet. This defeats the safety feature and
could expose you to electric shock.
3 | iLuv
INTRODUCTION
GETTING STARTED
Power Source
Protect your Furniture
Installing the Batteries
Location of Controls on the Main Unit
OPERATIONAL INSTRUCTIONS
Turning the System ON
Turning the System OFF
General Playback
Adjusting the Volume
Controlling the Snooze Function
Answering your iPhone
Using the iPod/iPhone App
TROUBLESHOOTING GUIDE
USER SAFETY GUIDE
SPECIFICATIONS
TABLE OF CONTENTS
1
4
4
5
6
7
7
7
7
7
7
8
9
10
16