IBM PC Server/Enterprise Racks 42S - Manual (Page 123)

© Copyright IBM Corp. 2001
115
NetBAY3 enclosure
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Casters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Foot pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Front cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Device side rails . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Stacking NetBAY3 enclosures. . . . . . . . . . . . . . . . .118
Parts Listing (NetBAY3). . . . . . . . . . . . . . . . . . . . . 121
Features
The IBM NetBAY3 enclosure provides a convenient 3-U high by 24-inch deep storage
cabinet for the installation of computer devices.
Note: Vertical measurements are given in rack units (U). One U is equal to 4.45 cm
(1.75-inches).
Up to three NetBAY3 enclosures can be stacked under certain IBM servers. Devices
such as the IBM EXP10, an uninterruptable power supply (UPS), or various
telecommunications equipment can also be installed in a NetBAY3 enclosure.
Locations
The following sections contain information on specific equipment locations.
Important:
• The maximum server weight is 77 kg (170 lb.).
• Refer to the latest IBM Server Hardware Maintenance Manual when
servicing the server.
• Assure all power and signal cables are routed properly and are not
pinched.
• Make sure NetBAY3 enclosures in a stack are securely fastened
together.
• Servers are lifted onto and off of the NetBAY3 enclosure. Make sure
you have help when lifting.
• Servers are lifted onto and off of the NetBAY3 enclosure. Make sure
you have help when lifting.