Installing two devices horizontally – IBM PC Server/Enterprise Racks 42S User Manual
Page 179
NetBAY Power Distribution Units
171
Installing two devices horizontally
Use the following procedure to mount two Rack PDUs horizontally in your rack
cabinet:
1.
Refer to the documentation that comes with your rack cabinet for additional
information.
Notes:
a.
Removing the rack doors and side panels might make your Rack PDU
installation easier.
b.
Use clip nuts for rack cabinets with round holes; use cage nuts for rack
cabinets with square holes.
2.
Attach a dual-device attachment bracket 6 to the right side of one of the Rack
PDUs with two M3x5 screws; then, attach another dual-device attachment bracket
5 to the left side of the other Rack PDU with two M3x5 screws.
Notes:
a.
When you install two Rack PDUs next to each other, you will need some parts
from both options.
b.
Turn the second dual-device attachment bracket
c5d so that the threaded
holes are on the opposite side of the device as the holes on the other
attachment bracket
c6d.
Cage
nuts
Cage
nuts
Clip
nuts