Insignia NS-P10DVD11 - Manual (Page 10)

10
Insignia NS-P10DVD11 10” Portable DVD Player
www.insigniaproducts.com
Setting up your player
Connecting to AC power
To connect to AC power:
• Plug one end of the AC to DC power adapter into the DC IN jack
on the side of your player, and the other end into an AC outlet.
Connecting to a 12V car power outlet
To connect to a 12V car power outlet:
1 Plug one end of the car power adapter into the DC IN jack on the side
of your player.
2 Plug the other end of the adapter into a 12V car power outlet or car
cigarette lighter socket.
Charging and using the built-in battery
To charge and use the built-in battery:
1 Connect the supplied AC power adapter or car power adapter to the
DC input jack on the player, then plug the adapter into AC power
outlet or car power outlet. When the battery is charging, the charge
indicator LED turns red. When the battery is fully charged, the
indicator turns off.
2 Unplug the power adapter when the battery is fully charged, then you
can use your player by using the built-in battery.
Note
During playback, an icon appears on the screen, and the
power indicator LED flashes green, which means the battery has
low power and you should recharge the built-in battery now.
NS-P10DVD11_11-0590_MAN_V2_EN.fm Page 10 Tuesday, June 14, 2011 2:48 PM