iLive AP7141 - Manual (Page 17)

iLive Fixed Format Getting Started Guide 17 AP7141 iss.2
SEL
MIX MIX
1
IP
PAN
L R
SEL
MIX MIX
SEL
MIX MIX
SEL
MIX MIX
SEL
MIX MIX
WDG1
AUX
PRE
WDG2
AUX
ASSIGN
PRE/POST FADE
ASSIGN
PRE/POST FADE
ROTARY SHIFT
PRE
IEM1
AUX
STEREO
PRE
IEM2
AUX
STEREO
PRE FADER
CH
AUX
PRE
PAN
L R
LEV
FADER
CH
IEM1
AUX
STEREO
PAN
L R
PAN
L R
Mix sends (Aux, FX, Matrix) may be
configured in the
ROUTING screen as fader
or rotary sends.
Fader mixes Faders = sends from channel
Encoders = Pan (if stereo mixes)
Rotary mixes Faders = Masters
Encoders = Sends from channels
Shifted encoders = Pan
MASTERS
Current mix status
ON = channel is
assigned
PRE = Channel
send is set pre-
fader.
1
3
2
4
5
CHANNEL
1 Press a channel strip MIX key Its sends are presented across the master strips.
2 Assign the channels to each master Hold down the ASSIGN key then press
master MIX keys to assign to the available mixes. The ON icon displays in the LCDs.
3 Set pre or post fader To set the send to each master pre or post-fade, hold down the
PRE/POST key and then press master SEL keys.
4 Adjust the send levels Aux, FX and matrix mixes can be configured for sends on
faders or rotaries. For groups and DCAs (no send levels), the faders and encoders remain
unaffected.
5 Adjust the image For stereo or multi output main mix use the master encoders to
adjust the send Pan. Hold down ROTARY SHIFT and turn the encoder to adjust Pan for
stereo mixes with encoder sends.
Channel MIX view
- Sends to all masters from one channel
The ROUTING screen
Turn on the TouchScreen ROUTING page to display the
assignment and routing information for the channel or master
currently selected using a
SEL key. This gives you access to
advanced routing options as well as an alternative to using
the
MIX keys when adjusting sends and assignments.
In this screen you can view and change the channel mix and
DCA assignments, fader/pan/aux/matrix send levels, pre/post
fade settings and routing options.
Input - Also access the direct output level. Its source is
globally set in the
MIXRACK SETUP screen.
Aux - Also select the global channel send signal source for
each mix from a drop down menu.
Aux, Matrix - Choose to mix sends using the faders or rotary
encoders. This can be configured for each mix.
Note - Post-fader sends follow the fader level but get their
source as set in this screen.