Invacare BUZZ HMV - Manual (Page 25)

Part No. 1118395 25
®
SECTION 3 OPERATION
OPERATION
REPLACING THE RESET CIRCUIT BREAKER/FUSE
WARNING
NEVER defeat or bypass any fuse or circuit breaker. ONLY replace with a
fuse or circuit breaker with same rating.
CIRCUIT BREAKER (FIGURE 3)
NOTE: Key must be removed from ignition
before resetting circuit breaker.
1. Remove seat. Refer to REMOVING/
INSTALLING THE SEAT in SECTION
4 of this manual.
2. Remove rear shroud. Refer to
REMOVING/INSTALLING THE REAR
SHROUD in SECTION 7 of this
manual.
3. To reset, press circuit breaker button
located at rear of controller cover.
4. Reverse STEPS 1-2 to reassemble the
powered scooter.
FIGURE 3 - RESET CIRCUIT
BREAKER
Circuit
Breaker
Button
REAR OF SCOOTER
FRONT OF SCOOTER
FIGURE 2 - BRAKE RELEASE LEVER
NOTE: Remove key and disengage brake
before manually pushing the scooter.
Brake
Release Lever
DISENGAGE
(PULL LEVER
OUT)
ENGAGE
(PUSH
LEVER IN)