Before you operate the monitor – Iiyama Prolite E4835 User Manual

Page 9

Advertising
background image

ENGLISH

BEFORE YOU OPERATE THE MONITOR 4

The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local IIYAMA dealer or regional
IIYAMA office.

* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a
power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used.However, all guarantees and warranties are void for any problems or
damage caused by a power cable not supplied by IIYAMA.

Power Cable* User Manual

CAUTION

BEFORE YOU OPERATE THE MONITOR

HOW TO USE THE STAND

Install the Stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.

CAUTION

Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.

The monitor is the design that a stand rotate.

Be sure to rotate the stand before opearating the monitor,

and rotate the stand upward before you re-box the monitor.

D-Sub Signal Cable Audio Cable

CHEKING THE CONTENTS OF THE PACKAGE

HOW TO USE THE STAND

CAUTION

CAUTION

1.

Lay the monitor flat on a table with front face down (see Fig 1). Put a piece of soft cloth

on the table beforehand to prevent the monitor from being scratched.
2.

Unpack the stand and mount it onto the monitor base with aligning it to the hook

(see Fig 2).
3.

Slide the stand upward until it makes a click sound, indicating it is fixed (see Fig 3).

4.

Stand the monitor up (see Fig 4).

(Fig 4)

(Fig 1)

(Fig 2)

(Fig 3)

Advertising