8 integrated peripherals – IBM PSB Form Factor Board SAGP-845EV User Manual

Page 31

Advertising
background image

31

On-chip VGA

Enabled/Disabled On-chip VGA

Flash BIOS

Disabled/Enabled Flash BIOS

4.8 Integrated

Peripherals

CMOS Setup Utility – Copyright © 1984 – 2000 Award Software

Integrated Peripherals

On-Chip Primary PCI IDE Enabled

IDE Primary Master PIO Auto

IDE Primary Slave PIO Auto

IDE Primary Master UDMA Auto

IDE Primary Slave UDMA Auto

On-Chip Secondary PCI IDE Enabled

IDE Secondary Master PIO Auto

IDE Secondary Slave PIO Auto

IDE Secondary Master UDMA Auto

IDE Secondary Slave UDMA Auto

USB Controller Enabled

USB 2.0 Controller Enabled

USB Keyboard Support Enabled

Onboard Audio Device Enabled

Init Display First PCI Slot

IDE HDD Block Mode Enabled

Power ON Function BUTTON ONLY

KB Power ON Password Enter

Hot Key Power ON Ctrl-F1

Onboard FDC Controller Enabled

Onboard Serial Port 1 3F8/IRQ4

Onboard Serial Port 2 2F8/IRQ3

UART Mode Select Normal

UR2 Duplex Mode Half

Onboard Parallel Port 378/IRQ7

Parallel Port Mode SPP

ECP Mode Use DMA 3

PWRON After PER-Fail Off

Watch Dog Timer Unit Second

Item Help

________________

Menu Level ¾

If your IDE hard drive

supports block mode select

Enabled for automatic

detection of the optimal

number of block read/write

per sector the drive can

support

↑↓←→ Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit

F1: General Help

F5: Previous Values F6: Fail-safe defaults F7: Optimized

Defaults

Note: There are some items in bottom of scroll.

On-Chip Primary/Secondary PCI IDE

The integrated peripheral controller contains an IDE interface with support for two

IDE channels. Select Enabled to activate each channel separately.

The choice: Enabled, Disabled.

IDE Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields let users set a PIO mode (0-

4) for each of the four IDE devices supported by the onboard IDE interface.

Modes 0 through 4 provide successively increased performance. In Auto mode,

the system automatically determines the best mode for each device.

The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.

Advertising