IBM X32 - Manual (Page 65)

Key
combination
Description
Fn+F9 Note: This function is supported only in X31
and X32 series. X30 series does not have this
function.
Opens
the IBM ThinkPad EasyEject Utility
screen. Buttons for the following choices are
displayed:
v Eject ThinkPad PC from Dock: This button
is displayed only if the ThinkPad computer
have been attached to a ThinkPad Dock II or
a ThinkPad Dock. You can detach the
computer from the ThinkPad Dock II or the
ThinkPad Dock.
v Eject ThinkPad PC from X3 UltraBase: This
button is displayed only if theThinkPad
computer have been attached to X3
UltraBase. You can detach the computer from
the X3 UltraBase.
v Eject ThinkPad PC from Mini Dock: This
button is displayed only if theThinkPad
computer have been attached to ThinkPad
Mini Dock and either have been connected a
diskette drive to the external-diskette-drive
connector of the ThinkPad Mini Dock, or
attached one or more USB devices to the
ThinkPad Mini Dock. If you click the button,
you can stop all the USB devices and remove
them safely.
Note: If a diskette drive is connected to the
external-diskette-drive connector of the
ThinkPad Mini Dock, you cannot connect a
USB diskette drive.
v Run EasyEject Actions: User can select,
stop, and remove external devices connected
to the ThinkPad computer.
v Configure EasyEject Actions: User can
open the IBM ThinkPad EasyEject Utility main
window.
v Fn+F9 Settings: User can configure the
settings for the Fn+F9 function.
Notes:
1. This function is supported only in Windows
XP and Windows 2000.
2. This Utility is used to stop and remove all
ejectable devices connected to the ThinkPad
computer, the ThinkPad Mini Dock, the
ThinkPad Port Replicator II, and the
ThinkPad Port Replicator. You cannot use it
to detach the computer from ThinkPad Mini
Dock, the ThinkPad Port Replicator II, and
the ThinkPad Port Replicator.
Fn+F10 Reserved.
(continued)
Product overview
ThinkPad X30, X31, X32 61