Invacare 6291E Adult - Manual (Page 3)

Part No. 1061343 DUAL RELEASE WALKER 3
FOLDING THE WALKER (FIGURE 2)
1. To fold the walker, press down on the left or right release handle and pivot the side
frame inward until it meets the front crossbrace.
2. Repeat the same procedure for the other side frame. The walker now is folded for
storage or transportation.
NOTE: Each individual should always consult with their physician or therapist to determine the proper
adjustment and usage.
1. Adjust the leg extensions by
depressing the snap button on the
lower part of the walker leg and
allowing it to snap through the
appropriate adjustment hole on the
leg extension.
NOTE: The leg extension adjustment holes are
numbered for convenience in identifying the
corresponding adjustment hole to ensure
proper and even height adjustment.
2. Repeat this procedure for each leg.
FIGURE 3 – ADJUSTING LEG
EXTENSIONS
Leg
Extension Snap
Button
ADJUSTING THE LEG EXTENSIONS (FIGURE 3)
WARNINGS
Ensure all snap buttons fully protrude through adjustment holes of each leg
extension. This ensures that the leg extensions are securely locked in position.
The leg extensions should be adjusted so the walker is level. If an even height
cannot be achieved, adjust the leg extensions so that the rear of the walker is
no more than one (1) inch lower than the front.
FIGURE 2 – FOLDING THE WALKER
Release
Handles