Intermec PK80 - Manual (Page 81)

Graphics Printing Appendix
—
C
69 PK80 Series 80-Column Printer User’s Manual
ESC 7 — Cancel Printing of Codes 128–159
This command is allowed for compatibility with the 6820 Printer but
causes no action on the PK80 Printer. Unlike the 6820 Printer, the default
for the PK80 Printer is ESC 6, not ESC 7.
Hexadecimal Format
1b 37
Note: This command is only available when the default SBCS character
set is selected.
ESC I — Printable Code Area Expansion
This command sequence allows certain ASCII codes 0 to 1Fh to be print-
able when the variable n is set to 1. This allows the use of these codes for
user-defined characters. If n = 0, the command returns 0 to 1Fh to non-
printable control codes. Only the following codes can be redefined as
printable characters. Codes not listed print as standard control codes.
Hexadecimal Format
1b 49 n
Printable Code Expansion Characters
Hex ASCII Hex ASCII
0 NUL 11 DC1
1 SOH 15 NAK
2 STX 16 SYN
3 ETX 17 ETB
4 EOT 1c FS
5 ENQ 1d GS
6 ACK 1e RS
10 DLE 1f US
Note: This command is only available when the default SBCS character
set is selected.