No-beep symptoms – IBM 6341 User Manual
Page 100
Advertising
No-beep symptoms
Important:
Type 2254, 2256, 2257, 6336, 6337, 6339, 6341, 6342, 6346, 6347, and 6348 computers default
to come up quiet (no beep and no memory count and checkpoint code display) when no
errors are detected by POST.
To enable beep and memory count and checkpoint code display when a successful POST
occurs, do the following:
1.
Select Start Options in the Configuration/Setup Utility program (see “Setup Utility
program” on page 10).
2.
Set Power-On Self-Test to Enhanced.
Symptom/Error
FRU/Action
No beep during POST but computer works
correctly.
1.
System Board
No beep during POST.
1.
See “Undetermined problems” on page
109.
2.
System Board
3.
Memory Module
4.
Any Adapter or Device
5.
Riser Card
6.
Power Cord
7.
Power Supply
92
Hardware Maintenance Manual
Advertising