Impex MWM 1801 - Manual (Page 10)

STEP 4 (See Diagram 4)
A.) Attach the Left Vertical Beam (#4) to the Left Base Frame (#3). Secure it with two
M10 x 2 ½” Carriage Bolts (#82),
∅
¾” Washers (#93), and M10 Aircraft Nuts (#90).
B.) Attach the Left Upper Frame (#11) to the Top Socket Assembly (#7) and the Left
Vertical Beam. Secure the Frame to the Left Vertical Beam with one Bracket (#47),
two M10 x 2 ½” Carriage Bolts (#82), two
∅
¾” Washers (#93), and two M10 Aircraft
Nuts (#90). Secure the Frame to the Top Socket Assembly with one Bracket (#47),
two M10 x 2 ½” Carriage Bolts (#82), two
∅
¾” Washers (#93), and two M10 Aircraft
Nuts (#90).
C.) Attach the Left Seat Support (#14) to the Left Base Frame (#3) and the Left Vertical
Beam (#4). Secure it to the Left Base Frame with one M10 x 2 ½” Carriage Bolt
(#82),
∅
¾” Washer (#93), and M10 Aircraft Nut (#90). Secure it to the Vertical
Beam with one Bracket (#47), two M10 x 2 ½” Carriage Bolts (#82), two
∅
¾”
Washers (#93), and two M10 Aircraft Nuts (#90).
D.) Attach the Leg Press Frame (#17) to the bracket on the Left Base Frame (#3).
Secure it with one M12 x 3” Allen Bolt (#77), two
∅
1” Washers (#92), and one M12
Aircraft Nut (#89). Do not over tighten the Nut and Bolt. Make sure the Leg Press
Frame is able to swivel.
E.) Attach the Leg Press Support Frames (#18) to both side of the Leg Press Frame
(#17). Secure them together with two M10 x 2 ½” Carriage Bolts (#82),
∅
¾”
Washers (#93), and M10 Aircraft Nuts (#90).
9