Impex pl2009 - Manual (Page 8)

Step 7
•
Attach the Stationary Handle
(#11) to the Front Vertical
Post (#12). Secure it with a
M8 x 1 ¼” Allen Bolts (#27)
and
∅
5/8” Washers (#24).
Step 8
•
Connect the sensor wire from
Front Vertical Post (#12) to
the sensor wire from
Computer (#13). Plug the
pulse wire from Front Vertical
Post into the hole located on
the bottom of the Computer.
Slide the Computer onto the
slot onto top of the Front
Vertical Post (#12).
7