Insignia NS-HD01 - Manual (Page 30)

30
NS-HD01
www.insigniaproducts.com
2 Press or to highlight an option, then press
/Enter. You can select:
• LCD Control—Lets you adjust the LCD
contrast or set the LCD Off Time.
• Seek Mode—Lets you select the seek mode.
• Version—Lets you view the MAIN and
MODULE (DSP) software version numbers.
• Factory Defaults—Lets you reset all settings
to the factory defaults.
3 Press or to adjust the option, then press
/Enter.
4 Press M to close the menu.
Adjusting the contrast
To adjust the contrast:
1
Press M to open the menu.
2 Press or to highlight LCD Control, then press
/Enter.