Connecting a computer, Using the basic controls, Turning the tv on and off – Insignia NS-LTDVD32-09 User Manual

Page 12: Adjusting the volume, Changing the video mode

Advertising
background image

12

Insignia NS-LTDVD32-09 32” LCD TV/DVD Combo

www.insignia-products.com

Connecting a computer

To connect a computer using VGA:

1 Plug a VGA cable (4) into the VGA port on

the computer (6) and into the VGA INPUT
port on the back of your TV.

2 Plug an audio cable (5) into the audio jack on

the computer (6) and into the AUDIO VGA
INPUT
port on the back of your TV.

3 Turn on your TV.

4 Press INPUT, then press

/

to select PC.

To connect to a computer or other HDMI
device using the HDMI1 jack:

1 Plug an HDMI cable (2) into the HDMI port on

the HDMI device (3) and into the HDMI1
INPUT
port on the back of your TV.

2 Turn on your TV.

3 Press INPUT, then press

/

to select

HDMI1.

To connect to a computer or other HDMI
device using the HDMI2 jack:

1 Plug an HDMI cable (8) into the HDMI port on

the HDMI device (3) and into the HDMI2
INPUT
port on the side of your TV.

2 Turn on your TV.

3 Press INPUT, then press

/

to select

HDMI2.

Using the basic controls

Turning the TV on and off

To turn your TV on and off:

1 Press POWER on the side of your TV or on

the remote control. The POWER/STANDBY
indicator turns blue.

2 To turn off your TV, press POWER again. The

POWER/STANDBY indicator turns red.

Adjusting the volume

You can adjust the volume using the controls on
your TV's side panel or the remote control.

To adjust the volume:

1 Press VOL+ or VOL- to increase or decrease

the volume.

2 Press MUTE to mute the sound, then press

this button again to restore the sound.

Changing the video mode

Your TV supports multiple video modes.

To select the video mode:

Press INPUT one or more times to select the
video mode, then press ENTER. You can
select:

TV

AV1

AV2

S-Video1

S-Video2

Component

DVD

HDMI1

HDMI2

PC (VGA)

Caution

The TV will automatically turn off after one minute
if there is no signal in PC mode.

Note

When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press the POWER button
on your TV or remote control.

Advertising