Invacare Xterra GT - Manual (Page 76)

Front 8" and Rear 6" Caster Assembly
NOTE: Front and rear caster assemblies use the same caster fork mounting hardware.
Item
Number Part Number Description Note
Quantity Per
Package Assembly
1101737 Cap, End, Tube, Black 1 1 1
1028550 Locknut (5/8-18) 1 1 2
1041444 Washer, Nylon (5/8 x 1-5/16 x 1/8") 1 1 3
1106166 Hardware, Caster Fork Mounting 1 1 4 A
1105838 Fork, Front - Right 1 1 5
1105839 Fork, Front - Left 1 1 5
1105840 Fork, Rear Caster - Right 1 1 5
1105841 Fork, Rear Caster - Left 1 1 5
1105852 Pin, Cotter (7/64 x 1") 1 1 6
1115246 Screw, Phillips Flat Head (M6 x 1 x 45mm) 1 2 7
1108005 Spacer, Steel (5/8 x 7/8 x 1/8") 1 1 8
1025724 Washer, Steel (15/32 x 5/8 x 3/64") 1 1 9
1107168 Nut, Hex Slotted (7/16-20) 1 1 10
1107698 Locknut (M6 x 1) 1 2 11
1108561 Hardware, Caster 1 1 12 B
40117X006 Bearing (5/8") 1 1 13
1006049 Bearing (7/16") 1 1 14
1105854 Cap, Hub, Black 1 1 15
1108003-NLA NLA - Rim (Outer/Inner) with Hardware 1 1 16 C,F
1108009 Wheel Assembly, Semi-Pneumatic, Front (8" x
2-1/4") 1 1 17
1108011-NLA NLA - Wheel Assembly, Semi-Pneumatic, Rear (6" x
2") 1 1 17 D
1110715 Wheel Assembly, Semi-Pneumatic, Urethane, Deep
Profile, Grey Tire/Black Hub (6" x 2") 1 1 17 E
1122067 Wheel Assembly, Semi-Pneumatic, Urethane, Deep
Profile, Grey Tire/Black Hub (6" x 2") (Pair) 2 1 17 E
A - Includes Items 1-3.
B - Includes items 6-11.
C - Includes items 7 and 11.
D - For chairs made before 7/14/03, order (pair) part number 1122067 dated after 7/13/03 so each side matches. The deep
profile caster design has two tread grooves with rounded corners instead of four tread grooves with square corners.
E - For chairs made after 7/13/03. The pair part number is also used for converting casters on chairs made before 7/14/03.
F - Rim is no longer available, see item 17.
NOTE:
75
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 01-058