8appendix a, 1 unlocking a simlocked modem with mobilink 2 – InFocus Merlin U630 User Manual
Page 42
U
U
6
6
3
3
0
0
U
U
S
S
E
E
R
R
M
M
A
A
N
N
U
U
A
A
L
L
P
P
A
A
G
G
E
E
4
4
2
2
GU-90023610GU
Revision 1
8
APPENDIX A
8.1 UNLOCKING A SIMLOCKED MODEM WITH MOBILINK 2
The term SIMLOCK is often used by the industry when a modem/data card is configured for use only with SIMs of
a particular carrier. Technically speaking, when a modem/data card is SIMLOCKED it is actually NETWORK
LOCKED. Carriers usually request specific configurations for the modem/data card, one of which is for the
modem to be SIMLOCKED. An algorithm generates a Mobile Equipment Personalization code (MEP), which de-
activates the mechanism that restricts the modem to SIMs of a particular carrier.
Novatel Wireless cannot, and does not provide the MEP code. Any request for the MEP code configuration must
be made through the carrier from whom the modem or data card was purchased.
If your modem/ data card is SIMLOCKED, and you have obtained the MEP code from your carrier or service
provider, follow the steps below to unlock it.
1.
Launch MobiLink 2. See section "Creating a data session" if necessary.
2.
MobiLink 2 will initialize the card, and might ask you for a PIN code. Enter PIN code in the box and click
OK. This code is particular to your SIM and is different from your MEP code. See Figure 41.
FIGURE 41
3.
MobiLink 2 will now request the MEP code. Enter MEP code and click OK. See Figure 42.
FIGURE 42