Troubleshooting and frequently asked questions, Troubleshooting, Troubleshooting 23 – InFocus LiteShow network adapter User Manual
Page 28
InFocus LiteShow User’s Guide
23
Troubleshooting and Frequently Asked Questions
Troubleshooting
No LiteShow adapters appear in the list of LiteShow Manager. Try the following
:
•
Make sure that the LiteShow-enabled projector is in range with your computer and that the projector is
powered on.
•
Click the Scan button.
•
Make sure your computer has a valid IP address.
•
Make sure that your computer’s wireless adapter is installed, plugged in, and enabled.
•
Make sure that your computer’s wireless adapter antenna is switched on or extended.
•
Make sure that your computer’s wireless adapter is configured to match the settings that display on the LiteShow
splash screen. Refer to information on Infrastructure and Ad-Hoc modes on page 20.
•
For more detailed information, visit the InFocus website at www.infocus.com/service/liteshow.
Performance is poor; projection takes a long time. Try the following
:
•
Physically move the computer so that it is closer to the LiteShow adapter.
•
Check to see that there are no interfering 802.11b or 2.4 GHz devices, such as Bluetooth wireless devices or micro-
wave ovens in use, in the area of the computer and LiteShow adapter. Cordless phones and microwave ovens may
also cause performance problems.
•
Move the slidebar in the Preferences box to Better Performance.