Impex BF-1200 - Manual (Page 6)

ASSEMBLY INSTRUCTION
NOTE: It is strongly recommended that two or more people assemble this machine to avoid
possible injury.
STEP 1 (See Diagram1)
A.) Do not tighten the Nuts and Bolts until instructed to do so.
B.) Attach the Front Stabilizer (#39) to the Main Frame (#32). Secure it with two M8 x 2 ½” Carriage Bolts
(#35), two
∅
5/8” Curved Washers (#24), and two M8 Acorn Nuts (#37).
C.) Attach the Rear Stabilizer (#36) to the Main Frame. Secure it with two M8 x 2 ½” Carriage Bolts (#35),
two
∅
5/8” Curved Washers (#24), and two M8 Acorn Nuts (#37).
D.) Securely tighten all Nuts and Bolts installed.
DIAGRAM 1
5