InSinkErator H778 - Manual (Page 2)

Equipment You May Need:
■ ■
For your satisfaction and safety, read all instructions, cautions, warnings and dangers before installing
or using this instant hot water dispenser.
■ ■
Make sure that all electrical wiring and connections conform to local codes.
■ ■
A standard 115-volt grounded electrical outlet is required for the dispenser’s electrical power.
■ ■
The wall outlet powering the dispenser must have power supplied to it continuously.
■ ■
To ensure proper operation, this unit is not intended to be flushed with chlorine. If you suspect elevated
levels of chlorine in the water, it is recommended to use our water filtration system.
■ ■
Moving parts inside the tank causing a rattling noise is normal.
WHAT YOU SHOULD KNOW BEFORE YOU BEGIN
Equipment Required:
■ Drill
■
Compression fitting,
T-fitting or saddle valve
■
Adjustable wrench
■ Phillips and flat blade screwdrivers
■
Pencil
■
Tape Measure
■
Level
■ ■ Anchors for drywall
■ ■ Hole saw
■ ■ Basin wrench
■ ■ Hole punch
2
IN THIS PACKAGE
Mounting Screw Mounting Washer Fiber Gasket 4" Extension
C1300
H778 3/4" Screws (2)
Semi-circular
Mounting Plate Hex Nut Hex Tool 3/4" Screws (2) Rubber O-Ring
Food Service Equipment
Instant Hot Water Dispenser
Installation, Care & Use Manual