Before connecting devices, Locating the television, Connecting the antenna – Insignia NS-LCD22 User Manual

Page 8: Connecting a vcr

Advertising
background image

6

Insignia NS-LCD22 LCD TV

www.insignia-products.com

3 Replace the cover.

Before connecting devices

•

Carefully check the terminals for position and
type before making any connections.

•

The illustration of the external equipment
may be different depending on your model.

•

Loose connectors can result in image or color
problems. Make sure that all connectors are
securely inserted into their terminals.

•

Refer to the user manual of the external
device as well.

•

When connecting an external device, turn the
power off on the panel to avoid any issues.

Locating the television

Install the television in a room where direct light
will not fall upon the screen. Total darkness or a
reflection on the picture screen may cause
eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.

Connecting the antenna

Optimum reception of color requires a good
signal and generally means that an outdoor
antenna must be used. The exact type and
position of the antenna depends upon your
particular area.

Connecting a VCR

Connect the Audio/Video cables between the
Audio (L/R)/Video jacks on the television and
VCR.

To play the VCR:

1 Turn on your television, then press the INPUT

button. The SOURCE INPUT menu opens.

2 Press

or

to select Composite (or

S-Video if the S-VIDEO terminal is used),
then press ENTER to confirm.

3 Turn on your VCR, insert a videotape, then

press the Play button.

Caution

Improper use of batteries can result in a leakage
of chemicals and/or explosion. Be sure to follow
the instructions below.
•

Place batteries with their terminals
corresponding to the (+) and (-) indications.

•

Different types of batteries have different
characteristics. Do not mix batteries of different
types.

•

Do not mix old and new batteries. Mixing old
and new batteries can shorten the life of new
batteries and/or cause old batteries to leak
chemicals.

•

Remove batteries as soon as they are
non-operable. Chemicals that leak from
batteries can cause a rash. If chemical leakage
is found, wipe with a cloth.

•

The batteries supplied with the remote may
have a shorter life expectancy due to storage
conditions.

•

If the remote control is not used for an
extended period of time, remove the batteries
from the remote control.

Note

•

We recommend that the 75-ohm coaxial cable
be used to eliminate interference and noise
which may occur due to radio wave conditions.

•

Do not bundle the antenna cable with the
power cord.

•

If you cannot install the antenna correctly,
contact your dealer for assistance.

Note

Cables are often color-coded to connectors.
Connect red to red, white to white, and yellow to
yellow.

Note

•

For better video, you can use the S-video
terminal if your source supports it.

•

The S-video terminal shares the same audio
jacks with VIDEO and has priority over the
VIDEO jack. To use a device connected to the
video jack, disconnect any plug from the
S-video terminal.

Wall antenna
socket

RF Coaxial Cable
(75 ohm)

TV Rear

Antenna input

Bronze
wire

VCR

TV Rear

AV cable

S-Video cable

NS-LCD22.fm Page 6 Monday, February 19, 2007 1:39 PM

Advertising