Image IMTL22506.0 - Manual (Page 13)

13
HOW TO CHANGE THE INCLINE OF THE
TREADMILL
To vary the intensity of your exercise, the incline of
the treadmill can be changed; there are three incline
levels.
Before changing the incline, remove the key
and unplug the power cord. Next, fold the treadmill
to the storage position (see HOW TO FOLD THE
TREADMILL FOR STORAGE on page 14).
To change the incline, first remove the incline pin from
one of the incline legs as shown at the right. Next,
adjust the incline leg to the desired height, and fully
reinsert the incline pin. Make sure that the incline pin
is in the “locked” position shown in the inset drawing.
Adjust the other incline leg in the same way. Make
sure that both incline pins are inserted from the
direction shown in the drawing.
CAUTION: Before using the treadmill, make sure
that both incline legs are at the same height. Do
not use the treadmill with the incline pins
removed. After you have adjusted the incline legs,
lower the treadmill (see HOW TO LOWER THE
TREADMILL FOR USE on page 15).
Incline
Pin
Incline
Pin
Incline
Pin