Intel M570TU - Manual (Page 39)

Disassembly
Removing and Installing the Processor 2 - 13
2.Disassembly
Processor Installation Procedure
1. Insert the CPU , pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!), and
turn the release latch towards the lock symbol ( Figure 8b ).
2. Remove the sticker ( Figure 8c ) from the heat sink.
3. Insert the heat sink as indicated in Figure 8c .
4. Tighten screws - in the order indicated on the label .
5. Replace the component bay cover and tighten the screws ( page 2 - 7 ).
A
B
C
D
1 4
c.
b.
d.
B
A
a.
D
B
C
2 3
1 4
Figure 8
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Remove the sticker from
the heat sink and insert
the heat sink.
d. Tighten the screws.

A. CPU
D. Heat Sink