Impex EVE-840 - Manual (Page 10)

STEP 4
(See Diagram 4)
A.) Attach two Ø ¾” Bushings (#54) to the pivot on the Main Seat Support (#1). Attach the
Seat Incline Support Bracket (#8) to the Bushings and align the holes. Secure it with one
M10 x 4 ½” Allen Bolt (#40), two Ø ¾” Washers (#48), and one M10 Aircraft Nut (#50).
B.) Attach two Ø ¾” Bushings (#54) to the Seat Incline Support Bracket (#8). Attach two Seat
Support Frames (#6) to the Bracket and align the holes. Secure them with one M10 x 8 ¼”
Allen Bolt (#38), two Ø ¾” Washers (#48), and one M10 Aircraft Nut (#50).
C.) Do not over tighten the Nuts and Bolts. Make sure the Seat Incline Support Bracket and
Seat Support Frame are able to swivel.
DIAGRAM 4
9