Insignia NS-2024 - Manual (Page 6)

4
Insignia NS-2024 Two-Piece Speaker System
www.insignia-products.com
Using your speakers
To use your speakers:
1 Plug the AC adapter into a power outlet, then plug the DC
connector into the DC jack on the back of the right speaker.
2 Plug the green audio connector plug into the audio source.
3 Press the Power button to turn on the speakers.
4 Turn on the audio source, then adjust the volume to a comfortable
level.
Troubleshooting
Checking your sound source:
You may believe that the speakers are not working, when in fact the
sound source may be the problem. When connecting to a computer,
the most common problem is an incorrect connection. Make sure that
you are connected to the audio output jack from your computer sound
card. Many times it has a green color to it. Also, make sure that your
CD or DVD drive is playing and the volume settings are turned up and
not muted. If you still have problems, disconnect the speaker source
cable from your computer and connect it to a Walkman or personal
CD player, or anything else with a mini headphone jack. If your
speakers work on the other source, you know the speakers are OK
and the problem is in your computer or the connections.
Copyright
© 2007 Insignia. Insignia and the Insignia logo are trademarks of Best Buy Enterprise
Services, Inc. Other brands and product names are trademarks or registered
trademarks of their respective holders. Specifications and features are subject to
change without notice or obligation.
For service and support call (877) 467-4289.
Problem Solution
The speakers will
not turn on The AC/DC adapter is not connected to the speaker and the AC
wall outlet
The power is not turned on
The speaker does
not produce sound Make sure that the speakers are getting power (see above steps)
The volume setting is too low. Turn up the master volume control
to the 1/4 to 1/2 level
Check all cable connections
Check to see if your music source is functioning correctly. (see
more on this below)