IOGear M1057 - Manual (Page 39)

38 39
Setting the Polling Interval Widows -XP
The polling interval will allow the configuration
utility to pull information from your network to
find out the status of all the connected USB Net
ShareStations and USB devices. By default,
this feature is not automatically configured. You
may set a time so that the server will perform
the polling automatically. To configure the polling
interval, in the IOGEAR USB Server utility, click
on
File -> Settings -> Polling Interval.
You may set a number from 1 – 60 in the
“Seconds” box. Click on “Submit” to allow the
new interval setting to take effect. Once you
have set a number the utility will automatically
update any changes made to server in the main
dialog box.