IBM 22P6969 - Manual (Page 30)

6. Restart the computer.
If the device icon is still not present, check cable connections, device jumper
settings, and resolve any existing conflicts.
The CD cannot be read.
Take the following actions:
1. The CD might be dirty; clean it as described in “Handling and caring for a
CD” on page 1-10.
2. The CD might be defective; try another CD.
3. The CD is not ISO-9660- or High Sierra Group-compatible. Check with your
place of purchase.
There is no sound from the CD.
Take the following actions:
1. Check that you are using an audio CD and not a data CD.
2. Adjust the sound-adapter volume control. See the documentation that
comes with your sound adapter and audio-CD player program.
3. Turn off the computer, unplug the cables from the electrical outlets for your
computer and all attached devices, and remove the computer cover. Check
that the audio-signal cable connects the 24X/10X/40X Max CD-RW drive to
the sound adapter.
The connectors on the audio cables provided do not fit the
connector on your audio adapter.
Some audio adapters might require a special cable. See the documentation that
comes with your sound adapter.
You might have to purchase a separate audio cable for the 24X/10X/40X Max
CD-RW drive. The audio-out connector on the 24X/10X/40X Max CD-RW
drive requires a MPC-2 compliant Molex 70553 or equivalent connector. (To
locate the drive audio connector, see “Back view of the drive” on page 1-4.) If
you are using an IBM computer or IBM sound adapter, see “Service and
support” on page D-1 for assistance.
You receive
″buffer underrun″ error messages when copying
CDs or making data CDs.
Take the following actions:
v If the file source is a network or removable device, copy the files to the local
hard disk first.
v If using CD copier, select Advanced and check the Copy to Hard Disk
option.
B-4 24X/10X/40X Max CD-RW Drive: User’s Guide