Ip23 quick start, Time sync, Inserts – iHome IP23 User Manual

Page 5: Power

Advertising
background image

2

Note: An insert provides the best stability and safety for your iPhone/iPod, but you can safely dock your iPhone
or iPod without an insert, provided you always do so with care. If you prefer to use an insert and don’t have one
for your model, please visit www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one.

2: inserts

Attach AC adaptor cable to jack
on back of the unit and plug the
other end into a wall socket to
play and charge iPhone/iPod.

Insert playing iPhone/iPod into the dock

(must not be in a “skin” or case). Your

audio will play through the unit. Press

volume buttons to adjust volume.

iPhone/iPod will charge while docked.

3: iPhone/iPod

1: AC power

iP23 Quick Start

Select the dock insert for your

iPhone/iPod model from the table

below and place insert in dock.

To remove insert, place

thumbnail in slot and gently pull

upwards.

iPhone 3G

insert 15

iPhone 3G/3GS

iPod touch 2G

insert 16

iPod touch 2G/3G

iPhone 4

insert 19

nano 6G/touch 4G

insert 20

nano 6G

iPod touch 4G

iPhone 4

nano 5G
insert 18

nano 5G

Use this insert

For this iPhone / iPod

RESETRESET

TESTTEST

4:time sync

• Make sure your iPhone or iPod is properly docked

• Press the Time Sync/Set button on the back of the unit

• “SYNC” will appear on the display, followed by “DONE”

• If “FAIL” appears, try again with a different iPhone or iPod, or see

Setting Time Manually (page 4).

1: power

Advertising