Playback, Basic playback – JVC HR-S7960E User Manual

Page 20

Advertising
background image

Filename [HRS7960E2-EN.fm]

Masterpage:Left

20

EN

Page 20

April 28, 2003 4:46 pm

PLAYBACK

Basic Playback

A

Load a cassette.

Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointed toward the recorder.

● Do not apply too much pressure when inserting.

● If the record safety tab has been removed, playback begins

automatically.

● If the record safety tab is intact, the recorder checks the tape

information for Programme Navigation. For details, refer to
“Navigation” (

pg. 36).

B

Find the programme start point.

If the tape is advanced past the start point, press 3 or
turn the JOG dial* to the left. To go forward, press 5 or
turn the JOG dial* to the right.

* functions only if FDP shows counter reading.

C

Start playback.

Press

4

. “bESt” appears blinking in the recorder’s front

display panel during automatic tracking. (

pg. 27)

D

Stop playback.

Press

8

on the remote control or

0

on the recorder’s

front panel. Then press

0

to remove the cassette.

Turn on the TV and select the video channel (or
AV mode).

Clean the video heads using a dry cleaning
cassette — TCL-2 — when:

● Rough, poor picture appears while a tape is played back.

● The picture is unclear or no picture appears.

● “USE CLEANING CASSETTE” appears on the screen (only

with “O.S.D.” set to “ON” (

pg. 49)).

NOTE:

The heads get dirty in the following cases:

● in an environment prone to extreme temperature or

humidity

● in a dusty environment

● flaw, dirt or mold on video tapes

● continuous usage for a long time

Usable cassettes

● Compact VHS camcorder recordings can be played on this

video recorder. Simply place the recorded cassette into a
VHS Cassette Adapter and it can be used just like any
full-sized VHS cassette.

● This video recorder can record on regular VHS and Super

VHS cassettes. While only VHS signals can be recorded on
regular VHS cassettes*, both VHS and Super VHS signals
can be recorded and played back using Super VHS
cassettes.

* By using the S-VHS ET function, it is possible to record and

play back with S-VHS picture quality on VHS cassettes
with this recorder.

HRS7960E2-EN.fm Page 20 Monday, April 28, 2003 4:46 PM

Advertising