JVC KD-S34 - Manual (Page 15)

ENGLISH
15
To erase the entire title
In step 2 on the left...
Satellite radio operations
This unit is satellite (SAT) Radio Ready—compatible
with both SIRIUS Satellite radio and XM Satellite radio.
Before operating your satellite radio:
• For connection, see Installation/Connection Manual
(separate volume).
• Refer also to the Instructions supplied with your
SIRIUS Satellite radio or XM Satellite radio.
• “SIRIUS” and the SIRIUS dog logo are registered
trademarks of SIRIUS Satellite Radio Inc.
• XM and its corresponding logos are registered
trademarks of XM Satellite Radio Inc.
• “SAT Radio,” the SAT Radio logo and all related marks
are trademarks of SIRIUS Satellite Radio Inc., and XM
Satellite Radio, Inc.
Listening to the satellite radio
Connect either one of the following (separately
purchased) to the CD changer jack on the rear of this
unit.
• JVC SIRIUS radio DLP—Down Link Processor, for
listening to the SIRIUS Satellite radio.
• XMDirect TM Universal Tuner Box—Using a JVC
Smart Digital Adapter (XMDJVC100: not supplied), for
listening to the XM Satellite radio.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating
starts automatically.
“UPDATING” flashes and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite
radio.
Title assignment
You can assign names to 30 station frequencies (FM and
AM) and up to 8 characters for each station name.
1
Select FM/AM.
2
Show the title entry screen.
3
Assign a title.
1 Select a character.
2 Move to the next (or previous) character
position.
3 Repeat steps 1 and 2 until you finish
entering the title.
4
Finish the procedure.
Continued on the next page
EN12-19_KD-S34[J]f.indd 15 EN12-19_KD-S34[J]f.indd 15 4/25/07 10:23:11 AM 4/25/07 10:23:11 AM