Jabra PRO 920 - Manual (Page 17)

18
english
Jabra PrO 920
6. CALL mANAGEmENT
6.1 mAKING CALLS, ANSWERING CALLS AND ENDING CALLS
Phone with headset port
Phone with Jabra Link, or
Gn1000
Phone without headset port
Make
call
1. tap the headset button on the
desk phone.
2. Lift headset from docking
cradle, or
tap the multi-function button.
3. Dial number using desk
phone.
1. Lift headset from docking
cradle, or
tap the multi-function
button.
2. Dial number using desk
phone.
1. Lift headset from docking
cradle, or
tap the multi-function
button.
2. Lift desk phone handset and
set aside .
3. Dial number using desk
phone.
answer
call
1. Lift headset from docking
cradle, or
tap the multi-function button.
2. Lift desk phone handset and
set aside.
Lift headset from docking
cradle, or
tap the multi-function button.
1. Lift headset from docking
cradle, or
tap the multi-function
button.
2. Lift desk phone handset and
set aside.
end
call
tap the headset button on the
desk phone.
Dock the headset, or
tap the multi-function button.
1. Dock the headset, or
tap the multi-function
button.
2. Return desk phone handset
to receiver.
6.2 SWITCHING BETWEEN PHONE AND HEADSET
Switch from desk phone to headset
1. Lift headset from docking cradle.
2. Do not return desk phone handset to receiver, as this will hang up the call.
Switch from headset to desk phone (without Jabra Link or Gn1000)
1. Lift desk phone handset.
2. Dock headset, or tap the multi-function button.
Switch from headset to desk phone (with Jabra Link or Gn1000)
1. Lift desk phone handset.
2. Refer to specific desk phone documentation. In some cases a button must be pressed on the desk phone,
while in others the switch from handset to desk phone will be automatic.
6.3 CONFERENCE CALL WITH mULTIPLE HEADSETS
the Jabra PRO 920 is able to pair with four headsets in total for conferencing: one primary and three secondary
headsets.
Connect secondary headset
1. While the primary headset is undocked and on a call, dock the secondary headset with the base hosting the
call. When the headsets are successfully paired, a double-tone will sound in the primary headset.
2. tap the multi-function button on the primary headset to accept the secondary headset. the audio is now
shared between headsets.
Ending, or leaving, the conference
the primary headset user can end the conference by hanging up on the call. the call is ended for all headsets.
Guests can leave the conference by tapping the multi-function on their headset, or by docking the headset with
the base. the conference call is still active for the other headset(s).