Jabra JX10 - Manual (Page 2)

1
Answer/end
button
Manage your
calls directly
from your
headset
3
Charging socket
Charge from AC
adaptor or from
PC via USB cable
4
Volume control
Control the
call volume
without
accessing your
mobile phone
2
Dedicated
pairing button
Pairing is
simple with this
one-touch button
A pure design attitude
Stylish design
The Jabra JX10 takes Bluetooth
® headset design to the next level.
Created by world-renowned Danish designer, Jacob Jensen,
this is a wireless mobile headset where style is the operative word.
Compact design
The sleek, compact design makes Jabra JX10 amongst the smallest
and lightest Bluetooth headsets available – but there is no compromise
on the prize-winning functionality and performance that Jabra is
famous for. Weighing in at less than 10 grams, you’ll barely feel
you’re wearing it.
Intelligent design
Every aspect of the Jabra JX10 is designed to perfection. Pairing with
your mobile phone is simple with the intuitive one-touch button.
Automatic volume control elevates sound level and quality to match
your environment – and DSP (Digital Signal Processing) technology
reduces background noise significantly. Even recharging is simple with
the elegant desktop charging cradle.
Refine your style. Release your Jabra.
Quick start guide
Making a call
When you make a call from your mobile phone, the call will automatically
transfer to your headset. If your phone does not support this setting,
just tap the answer/end button to transfer the call to the headset.
Answering and ending a call
Tap the answer/end button on your headset to answer a call.
To end your call, just tap the answer/end button again.
Last number redial
Press the answer/end button for 1 second to redial the most recent
number dialed.
Basic functions
1. Fully charge your Jabra JX10 until the LED turns green and switch on by
pressing and holding the answer/end button. 1
2. Press the pairing button 2 marked to put the JX10 in pairing mode.
3. Set your mobile phone to ‘discover a Bluetooth device’
(see your phone user guide).
4. Press Yes or OK when asked if you want to pair the phone
with the Jabra JX10.
5. Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK.
6. Your phone will confirm when pairing is complete.
7. Release your Jabra!
5
Multi-coloured light
indicator (LED)
Shows status
on Bluetooth,
low battery and
charging
1
4
2
3
5