JVC KD-G440 - Manual (Page 12)

12
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 13 and 14.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Indication, [Range]
BASS * 1 , [–06 to +06]
Adjust the bass.
MIDDLE * 1 (mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TREBLE * 1 , [–06 to +06]
Adjust the treble.
FADER * 2 , [R06 to F06]
Adjust the front and rear speaker balance.
BALANCE * 3 , [L06 to R06]
Adjust the left and right speaker balance.
LOUD * 4 (loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
SUB.W * 5 , [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL ADJ (volume adjust), [–05 to +05, initial: 00]
Adjust the volume level of each source (except FM), in
relation to the FM volume level. The volume level will
automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you
want to adjust.
VOLUME, [00 to 50 or 00 to 30] * 6
Adjust the volume.
* 1 When you adjust the bass, mid-range, or treble, the
adjustment you have made is stored for the currently
selected sound mode (iEQ) including “USER.”
* 2 If you are using a two-speaker system, set the fader
level to “00.”
* 3 This adjustment will not affect the subwoofer output.
* 4 The adjustment made (LOUD ON/LOUD OFF) will be
applied to all sound modes.
* 5 Displayed only when “L/O MODE” is set to “SUB.W”
(see page 13).
* 6 Depending on the amplifier gain control setting. (See
page 14 for details.)
EN08-15_KD-G440[J]_3.indd 12 EN08-15_KD-G440[J]_3.indd 12 10/24/07 12:17:29 PM 10/24/07 12:17:29 PM