JVC AV-14F43 - Manual (Page 6)

6
Preparation
4 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
5 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.
• In case of resetting that the reason for such as removal, you can set the SETUP TOUR
function on the “MENU 3” menu. For details, see page 14.
1 Press the Main power button
on the TV.
The POWER lamp or POWER/ON
TIMER lamp lights. After the JVC
logo has been displayed, the TV
automatically switches to the
language setting mode.
SETUP TOUR
EXIT BY
OPERATE BY -+
DISPLAY
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
2 Press the MENU
M buttons to select the on-screen language.
3 Press the MENU y button.
The AUTO PROGRAMMING function will start and the indicator blinks.
STOP BY -+
SETUP TOUR
NOW PROGRAMMING
• To stop the AUTO PROGRAMMING function, press the MENU m buttons.
When all the TV channels that can be received on your TV have been preset, the
display goes out and the AUTO PROGRAMMING function operation is completed.
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH
PRESET function. For details, see page 15.
POWER lamp Main power button
RETURN + 0 -/-- CHANNEL
SCAN
DISPLAY
MENU
VOLUME
MUTING
DISPLAY
button
MENU /
buttons MENU –/+
buttons
CHANNEL