JVC HR-J245EA - Manual (Page 18)

18
EN
Regular Timer
Programming
Remember, the clock must be set before you can
programme the timer (
੬
pg. 8).
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you’re
just starting out, “P1”
appears.)
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
ENTER CHANNEL
POSITION
6
Press TV PROG +/–.
SET TAPE SPEED
7
Press (SP/LP) to set the tape speed.
TIMER RECORDING
– P1 –
START STOP
–:– – = –:– –
SP
DATE TV PROG
25.12 – –
[+/–] =
[MENU] : EXIT
– P1 –
START STOP
21:00 = –:– –
SP
DATE TV PROG
25.12 – –
[+/–] =
[MENU] : EXIT
– P1 –
START STOP
21:00 = 22:00
SP
DATE TV PROG
25.12 1
[+/–] =
[MENU] : EXIT
4
¶
1
4 ¢
7
3
8
¡
1 2 3
4 5 6
7 /
8
0
9
2
1
3
START+/–
DATE+/–
STOP+/–
q 5 / 8
2 3
PROG
TV PROG+/–
SP/LP