JVC AV-20RM4SE - Manual (Page 9)

ENGLISH - 8 -
• Press the RED button. Use “ ” or “ ” button to select the
position and press “ “ or “ ” button to select a letter..
Now, press the RED button again to store or BLUE button to
cancel NAME.
To delete a channel from a programme number:
• Move to the channel you want to delete or use the digits so
that the selected programme number is in cyan color.
• Press the YELLOW button. Now the corresponding channel
will be deleted and all the other channels below this pro-
gramme number will be moved one programme number up.
Now, press the YELLOW button again to delete or BLUE but-
ton to cancel DELETE.
To insert a channel into a programme number:
• Move to the channel to be inserted or use the digits so that
the selected programme number is in cyan color.
• Press the GREEN button. Now using “ “ or “ ” or “ ”
or “ ” buttons, move to the programme number..
Now, press the GREEN button again to insert or BLUE button
to cancel INSERT.
A.P.S.
If you enter the A.P.S. menu, you can automatically program-
me the received channels in your TV’s programmes with
A.P.S. ( Automatic programme system ).
1. After displaying the PROGRAM. menu, press the BLUE
button to enter the A.P.S. menu.
2. Select LANGUAGE with the “ “ or “ ” button, then
press the “ ” or “ ” button to select a menu language.
3. Select COUNTRY with the “ “ or “ ” button, then
press the “ ” or “ ” button to select the country you are
now located.
4. If you want to start programming, select START with the
“ “ or “ ” button, then press the “ ” button. The
message “A.P.S. IS RUNNING” appears and A.P.S. auto-
matically programmes the received channels in your TV’s
programme numbers. Afrer A.P.S. is finalized, the PRO-
GRAM. menu appears again.
To cancel A.P.S., press the “ ” button.
Other Features
Sound Mute
To cut off the sound of the TV, press “ ” button. The sound
wi l l be cut of f . To cancel mut e, press “ ” or “ ” or “ ” but-
ton. The volume level will be the same as the level before
mute when you cancel mute.
Information on Screen
First pressing the “ ” button displays the current status
“Programme number” and “Station name”.
Pressing this button again displays the current time.
Pressing this button once more remove the on-screen dis-
play.
To Display the Time
• While watching a TV programme with Teletext transmission
press “ “ button twice. The current time information, cap-
tured from Teletext will be displayed on the screen.
• If the programme being watched does not have Teletext
transmission, only a box will be displayed at the same loca-
tion.
• The time information will disappear after pressing “ “ but-
ton again.
When time information is displayed on screen, entering an-
other menu will remove it.
Standard
You can re-set the current PICTURE menu settings (except
Picture Mode setting) to the default settings.
• Press “STANDARD” button when no menu appears.
VCR Control Buttons
The buttons can be used to operate a JVC brand VCR.
Pressing the button having the same appearance as the origi-
nal remote control button of a device makes the function work
in the same way as the original remote control.
Press the VCR Control Button to control your VCR.
Note:
• If your device is not made by JVC, these buttons cannot be
used.
• Even if your device is made by JVC, some of these buttons
or any one of the buttons may not work, depending on the
device.
• You can use the / buttons to choose a TV channel
which the VCR will receive.
01-ENG&DK-AK30-AV-20&21RM4SE-50052496.p65 22.09.2004, 08:32 8