Canceling the display demonstrations, Setting the clock – JVC KD-G116 User Manual
Page 7
Advertising
7
ENGLISH
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]—see page 14.
1
2
3
4
Finish the procedure.
To activate the display demonstration
In step
3 above...
Setting the clock
1
2
Set the hour and minute.
1 Select “CLOCK H” (hour), then
adjust the hour.
2 Select “CLOCK M” (minute),
then adjust the minute.
3
Finish the procedure.
To check the current clock time when the
receiver is turned off
EN06-09_KD-G116[U_UH]f.indd 7
10/7/04, 3:36:02 PM
Advertising
This manual is related to the following products: