JVC GV-PT1 - Manual (Page 16)

16
Setting The Print Menu
Options available in the menu are as shown in the chart.
ADVANCED PRINTING
Menu
ITEM OPTIONS
PIX STABILIZER OFF
ON
MULTI PIX OFF
4
16
CONTENT SELECTED
PIX
SAME PIX
STROBE PIX
STROBE SPEED HIGH
LOW
ID Number 1—99
APPLICATION
This is the default setting.
If the scene you want to print is shaking, select “ON” to
stabilize it.
To print 1 scene per sheet.
To print 4 equally sized scenes per sheet.
To print 16 equally sized scenes per sheet.
When printing multiple scenes on one sheet, select this option
when you want a different image to appear in each section.
When printing multiple scenes on one sheet, select this option
when you want the same scene to appear in each section.
To print in Strobe Print format.
To print scenes at approximately 1/4 sec. intervals in
Strobe Print format.
To print scenes at approximately 1/2 sec. intervals in
Strobe Print format.
In the future, connection to and operation from a personal
computer will be possible using the JLIP connector.
The shaded options represent factory settings. When you unplug the printer and plug it in again,
all items indicated return to the factory settings.
* When printing with “PIX STABILIZER” set to “ON”, there may be some loss of detail or clarity.
In this case, simply set “PIX STABILIZER” to “OFF”.
PRINT MENU 1 / 2
PIX STABILIZER : OFF
MULTI PIX : OFF
CONTENT : SELECTED PIX
TO SELECT PUSH ( SELECT )
TO SET PUSH ( + , – )
2 / 2
STROBE SPEED : LOW
ID NUMBER : 20
LANGUAGE : ENGLISH
TO SELECT PUSH ( SELECT )
TO SET PUSH ( + , – )