JVC KD-S7250 - Manual (Page 16)

16
ENGLISH
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
• See pages 14-15.
2
Select “BAS (Bass)” or “TRE (Treble)”.
3
Adjust the bass or treble level.
See page 14 for details.
4
Repeat steps 2 and 3 to adjust the
other items.
5
To turn on/ off the loudness function.
• See page 14 for details.
6
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for the selected
sound mode is stored in memory.
7
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 15.
EN14-16 KD-S7250/700/680[J] 26/10/01, 8:47 AM 16