JVC AV-14AMG7 - Manual (Page 12)

4
POWER /
ON TIMER
Remote control buttons and functions
TV buttons and functions
Turn the TV on from standby and vice versa
Set OFF TIMER (
\ page 7)
Select ECO MODE ( \ page 5)
Select programme number
Operating the menus ( \ page 5)
Turn the volume Off / On
Adjust the volume level, Turn off Muting
Select Channel
Select the desired channel number.
For Hyper Scan:
Press and hold
PR changes without changing the picture. Once
you stop pressing CHANNEL+ or CHANNEL-
button, picture will change to the desired PR.
Display the programme number or video terminal number.
Select PICTURE MODE ( \ page 5)
RETURN PLUS function
Return to the frequently viewed channel.
RETURN PLUS
PROGRAMMED!
Press and hold
RETURN PLUS
CANCELED!
To cancel
Choose the channel you want to programme
RETURN function
If you have not set or have canceled the RETURN PLUS
channel, this will return to the previously viewed channel.
Press and hold
Remote control
sensor
POWER lamp - Indicates the TV’s status.
No colour : TV’s main power is being turned off.
Red
: TV’s main power is being turned on.
Blink : While the TV is in standby mode, ON
TIMER function is in used. While the
TV is in turn on mode, OFF TIMER
function is in used.
Note: When you turn off the power switch while
TV is in standby mode, the power lamp will go
off in 5 -10 seconds. When you operate the TV,
POWER Lamp will blink.
TV’s main
power on/off
Video and audio input jack
Headphone jack
Display the TV’s MENU,
Exit after fi nish setting
Adjust volume level
Select Channel
Select TV or video input
For two digits programme number
* This illustration shows AV-1400UE.
GGT0144-001B-H-EN.indd 4 GGT0144-001B-H-EN.indd 4 23-02-07 10:26:09 23-02-07 10:26:09