Jaguar bluetooth handbook JLM10 31 99 552 - Manual (Page 23)

23
Getting Started
R
All vehicles
Once a mobile phone is paired with the
vehicle, the vehicle will look for this
specific phone every time the ignition is
switched ON.
Pairing other phones
Only one mobile phone can be paired with
the vehicle at a time. Once paired, the
vehicle will look for the same phone each
time the ignition is switched ON (position
II): you do not need to manually pair the
phone with the vehicle every time you
switch the ignition ON.
The Bluetooth function of your mobile
phone must be switched on when the
ignition is switched ON in order for it to
pair with the vehicle automatically.
If a different Bluetooth mobile phone is to
be used with the vehicle, it must be paired
manually, as described previously. This
phone will then become the default
phone, which the system will look for
each time the ignition is switched ON.
Disconnecting a phone
To disconnect a mobile phone from the
system:
• Press the
button on the audio
panel or touch-screen.
• Enter ##3#*# on the keypad, and
press the button.
A mobile phone can also be disconnected
via the mobile phone’s keypad. Refer to
your phone’s manual for more details.
REJECTING A CALL
(The XJ, X-TYPE and S-TYPE)
Press CANCEL on the audio
panel to reject an incoming
call.
(The XK only)
Press C/TA on the audio panel to
reject an incoming call.
LAST NUMBER REDIAL
(The XK only)
Press and hold the send/end
button on the audio panel to recall
the last number dialled. See page
33 for more information.
RECONNECTING A PHONE
Once a mobile phone has been paired
with the vehicle, Jaguar may be shown in
the phone’s list of Bluetooth devices (see
your mobile phone manual for more
information).
If you manually unpair the phone, it is
advisable to delete Jaguar from the list of
Bluetooth devices before pairing it with
the vehicle again.