JVC KD-MX2800R - Manual (Page 38)

38
ENGLISH
Assigning names to the sources
You can assign names to CDs and the external component connected to the LINE IN plugs.
After assigning a name, it will appear on the display when you select the source.
Sources Maximum number of the characters
CDs up to 32 characters (up to 46 discs)
External component up to 12 characters
1
Select a source you want to assign a name to.
2
Press and hold SEL (select) for more than 2
seconds while pressing DISP.
Note:
You cannot assign a name to an MD.
When you select the CD as
the source: When you select the external
component connected to LINE IN
as the source:
DISP
SEL
7
4
5 3
2
EN30-41.KD-MX2800R[E]/2 99.5.21, 6:14 PM 38