JVC CU V10U - Manual (Page 2)

MAJOR FEATURES
1. Highly sensitive MS (Mid-Side) stereo microphone
2. Serial angle variation from 0° to 120° (with a 90°
click-stop)
3. Special anti-vibration structure to reduce noise
PART NAMES
INSERTING THE BATTERY
1 Slide the battery cover in the direction indicated by the
arrow.
2 Insert the "AAA" battery (UM-4) as shown in the illustration,
positioning it so that the negative – side is inserted first.
3 Close the battery cover.
* The provided battery is for your trial use. Please replace it
with a new one at your earliest convenience.
0 ° 90 ° 120 °
TURNING THE POWER ON/CHECKING
THE BATTERY
1 Set the power switch to ON.
2
The Power/Battery remaining lamp blinks momentarily, then
goes off.
(It remains off after blinking when the power is turned on in
order to reduce battery consumption.)
3 Replace it with a new one when the power is turned on but
the lamp doesn't blink.
4 Do not forget to turn the power switch OFF when the
microphone is not in use.
HOW TO USE
Adjust the stereo angle according to the examples shown below.
<Example>
Stereo angle
When widely-surrounding sound is recorded ................. 120°
(the sound of train, airplanes, fireworks, etc.)
When less-surrounding sound is recorded ........................ 90°
(the sound of birds singing, musical instruments, etc.)
When a specific sound is recorded ..................................... 0°
OFF ON
OPEN
OFF ON
OPEN
Power <OFF> Power <ON> .... the lamp blinks
momentarily.
Stereo angle change switch
Power switch Power/Battery remaining lamp
120°
90°
0°
© 1997 VICTOR COMPANY OF JAPAN, LTD.
Windscreen
Power/Battery remaining lamp
Power switch
Battery cover
Fastening screw
Stereo angle
change switch
ø3.5 stereo
mini-plug
Straight cord
Microphone shoe
To attach the camcorder, use
the optional Shoe Adapter
CU-V418U.
Arrow ( )
Battery cover