JBL 950-0224-001 - Manual (Page 4)

1.
2.
4 jbl on tour Xtb user Guide
unpackinG
Carefully unpack your speaker system and identify all its components:
Power supply Remote control
General setup
Unpack the JBL On Tour XTB system and its power supply.
Plug the adapter into the “12V DC-in” port on the back of the unit and then into a wall outlet. 1.
Turn on the power switch. The green indicator light will turn on. 2.
Remove the remote control battery protector before operating the remote control. 3.
JBL On Tour ™ XTB unit Carry case Auxiliary audio cable
volume control (on base unit)
Volume increase “ ”
Volume decrease “ ”
Answer/end phone call (MFB) “ ”
Power switch
0050CSK - JBL On Tour XTB v14.indd 4 09/10/08 14:15:27