JVC XV-N33SL - Manual (Page 6)

Preparations
4
XV-N33SL/GNT0024-014B/English
P
rep
a
rations
Connecting to optional audio equipment
Connecting to a stereo audio amplifier/receiver
Connect the unit’s AUDIO OUT (LEFT/RIGHT) jacks to any line-
level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or
receiver.
NOTE
Sound recorded on DTS-encoded DVD VIDEO or DTS-encoded
Audio CD discs are not output from the analog (AUDIO OUT
LEFT/RIGHT) jacks of the unit.
Connecting to a digital audio device
You can enjoy sound of enhanced quality by connecting the unit’s
DIGITAL OUT (either OPTICAL or COAXIAL) jack to a digital
input of an amplifier, etc., using an optical or coaxial digital cable.
The digital audio signal on a disc will be transferred directly from
the unit. If the connected digital audio equipment is a Dolby
Digital or DTS decoder or an amplifier with a built-in decoder, you
can enjoy high-quality surround sound.
NOTES
• Connect the unit and the digital audio device by using either an
optical digital cable or a coaxial digital cable.
• It is not recommended to use the digital jacks for dubbing.
When recording the sounds (DVD VIDEO, SVCD, Video CD or
Audio CD) played back on the unit, record them through the
analog jacks.
• Depending on the disc, no signal may be output from the
DIGITAL OUT. Make an analog connection in this case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference
display correctly according to the connected digital audio
equipment. If setting made for [DIGITAL AUDIO OUTPUT] is
incorrect, loud noise may be generated causing damage to
the speakers (see page 23).
RIGHT
LEFT
DVD
IN
AV CO MPU LINK
NTS C PAL
VIDEO SIGNA
L
SELECT
OR
RIGHT
LEFT
COAXIAL
VIDEO
S-VIDEO
Y
PB
PR
OPTICAL
PCM /STR EAM
COM PON ENT VID EO O UT
VID EO O UT
AUD IO O UT
DIG ITAL OU T
White
Red
The unit Audio cable (not supplied)
Amplifier or receiver
White
Red
RIGHT
LEFT
DVD
COAXIAL
OPTICAL
DIGIT
AL
IN
IN
AV CO MPU LINK
NTS C PAL
VIDEO SIGNAL
SELECT
OR
RIGHT
LEFT
COAXIAL
VIDEO
S-VIDEO
Y
PB
PR
OPTICAL
PCM /STR EAM
COM PON ENT VID EO O UT
VID EO O UT
AUD IO O UT
DIG ITAL OU T
When using the DIGITAL OUT
(OPTICAL) jack, remove the
protection cap. Do not lose the
removed cap.
When the DIGITAL OUT
(OPTICAL) jack is not used,
replace the protection cap in the
jack.
The unit
Audio cable (not supplied)
Digital equipment
Optical digital cable
(not supplied)
Coaxial digital cable
(not supplied)
N33SL(USUBUGUXUWA).book Page 4 Monday, February 24, 2003 7:26 PM