JVC HR-J261EU - Manual (Page 27)

Filename [HRJ261EU2.fm]
Masterpage:Right
EN
27
Edit To Or From
Another Video
Recorder You can use your recorder as the source player or as the
recording deck.
A
Make connections.
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated.
B
Set the input mode of recording deck.
With this video recorder, press AUX (NUMBER key “0”)
and/or PR to select “L-1”.
● When using another recorder as the recording deck, refer to its
instruction manual.
C
Set the edit mode.
See “PICTURE CONTROL” on page 29.
D
Start the source player.
Engage the Play mode of the source player.
E
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step 3, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
● When you use this recorder as the source player for editing, be
sure to set “O.S.D.” to “OFF” before starting (
੬
pg. 29).
Video
channel or
AV mode
21-pin SCART cable
(not provided)
Recorder Your recorder
Another recorder
Player
TV receiver
RF cable
(provided)
A
B
Video
channel or
AV mode
21-pin SCART cable
(not provided)
Recorder
Your recorder
Another recorder
Player TV receiver
RF cable
(provided)
HRJ261EU2.fm Page 27 Friday, December 10, 1999 5:40 PM